Tube Sealed
Lancome purchased from fragrancenet.com spot corrector. Box is crushed and tube is not sealed. fake? way to tell?
fragrancenet.com on the website, says that the skin can not be returned. but the package (plastic skin) is a kind of loose box is a bit squashed. The tube is sealed. (Can anyone remember or Skin Care products from Lancôme is usually sealed or not?) How can I tell if the product is fake? It really drive me crazy to suspect might be fake. Any advice? (lesson I've learned is that I will never buy skin care products from the website), but what can I do this time? dealing with the customer will fragracenet.com not a pleasant experience, I have learned from other buyers. Should I throw it away and take the damage? or JUST tell me that tube of Lancôme usually sealed. THANKS A LOT!
I do not Lancome products are sealed. To be safe … just go to a store in your town and demand. As long as you … not to use the products. Gisele http://www.mybeautymatch.com
GoGos – Lips are sealed – The Tube – 1980s
|
|
FLEX-TUBE FILL & SEAL MACHINE $48,500.00 |
|
|
Simplex Compact Abdichtung Ship Stern Tube Seal & 52″ Propeller Tug Icebreaker $30,000.00 |
|
|
100pcs sealed NEOTRON NOS 6J7MG tubes 6J7G 348A $3,999.00 |
|
|
BLUE CACTUS Tube Condenser Mic Microphone NIB Sealed Reduced Price, Must Sell! $2,100.00 |
|
|
Marshall Yngwie Malmsteen Signature YJM100 100W Tube Guitar Amp Head Sealed Box $1,999.99 |
|
|
CANADIAN SILVER GRIZZLY BEAR ROLL 25 COINS TUBE SEALED BY APMEX! $1,350.00 |
|
|
FACTORY SEALED Fender Pro Tube Twin-Amp Guitar Amp NEW IN BOX $1,275.00 |
|
|
$3,600 Value 2 Sealed Packs BD P800 Blood Collection System Tubes Plasma GLP-1 $1,249.99 |
|
|
Eimac 3CX1500C7 / 8938 TUBE BRAND NEW SEALED IN ORIGINAL BOX $1,249.95 |
|
|
AMERICAN EAGLE CRYSTAL TUBE – 20oz. PCGS INSPECT/SEAL!! $1,199.00 |
|
|
100 Philips ECG JAN 12AT7WC tubes,Original Sealed Box $999.88 |
|
|
GEM UNCIRCULATED 2007 AMERICAN SILVER EAGLE SEALED TUBE— 20 MINT STATE COINS ! $990.00 |
|
|
Trazar Corp (SCM) Sealed Tube Assembly 02-161584-00 $900.00 |
|
|
Shenda Music Envoy Tube premplifier, New Sealed in Box $899.00 |
|
|
2012 American Silver Eagle Roll of 20★Sealed Mint Tube★Other Dates Available $849.99 |
|
|
Lumenis CO2 Sealed-off Laser Tube Full Unit Water cool $800.00 |
|
|
2011 Silver Eagle NGC Early Releases Sealed 20 coin tube Gem BU $800.00 |
|
|
2011 Silver Eagles 20- Coin Sealed PCGS Tube BU (SFMint, First Strike) $799.00 |
|
|
Randall RM100 MTS 100 Watt All Tube Empty – Brand New – Factory Sealed $769.99 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 6″ wide bag $750.00 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 6″ wide bag $750.00 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 8.13″ wide bag $750.00 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 6.50″ wide bag $750.00 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 6.88″ wide bag $750.00 |
|
|
Triangle Form-Fill-Seal Tube & Forming Collar S/S 6.88″ wide bag $750.00 |
|
|
Universal Audio 710 Twin-Finity Tube and Solid State Microphone Preamp – SEALED $750.00 |
|
|
3CW5000F1 Eimac sealed in original boxes NOS Tube POST COSTS INCLUDED $675.00 |
|
|
Marshall MA50H ALL TUBE Guitar Amp Head (50W 2-Ch) *BRAND NEW! FACTORY SEALED!* $599.99 |
|
|
CO2 Sealed-off Laser Tube Water Cooling System+ LGK7770 $500.00 |
|
|
80w CO2 Sealed Laser Engraver Tube Water Cool $500.00 |
|
|
Haro Team Issue BMX Racing Bike 20 ” Sealed Bearings 21 ” top tube Alloy Frame $499.99 |
|
|
20 x 6J7MG Visseaux Tube Sealed Suit NOS ( 348A 6J7G ) $450.00 |
|
|
FORK TUBE SEAL INSTALLER HD KASTAR KAS-400 $439.95 |
|
|
PYI 02-200-312 PSS 2 INCH BOAT SHAFT SEAL 3 1/2 INCH TUBE $416.95 |
|
|
FIVE (5) TELEFUNKEN ECC81 audio tubes same codes NOS NIB sealed $399.00 |
|
|
Factory Sealed Case Of 100, 3A5, Sylvania JAN Tubes $395.00 |
|
|
Lasdrop Shaft Seal 1 3/4in Gen II – 3in Stern Tube $389.99 |
|
|
Orange AD-5 5W 1×10 ALL TUBE Guitar Combo Amp ***BRAND NEW! FACTORY SEALED!*** $379.99 |
|
|
Haro Pro Race BMX Racing Bike 20 ” Sealed Bearings 20.75 ” top tube Alloy Frame $374.99 |
|
|
Haro Pro Race XL BMX Racing Bike 20 ” Sealed Bearings 21 ” top tube Alloy Frame $374.99 |
|
|
60w CO2 Sealed Laser Engraver Tube Water Cool $330.00 |
|
|
60W CO2 Sealed Laser Tube Engraving Cutting Water Cool $330.00 |
|
|
50W CO2 Sealed Laser Tube Engraver Cutter Water Cool $325.00 |
|
|
50W CO2 Sealed Laser Tube Engraving Cutting Water Cool $325.00 |
|
|
New Fork Legs Tubes Kit Honda 72-78 CB750 K Stanchions Tube Seals #c16 $309.20 |
|
|
Lasdrop Gen II Shaft Seal 1 1/4″ 2 1/4″ Stern Tube $279.99 |
|
|
Lasdrop Gen II Shaft Seal 1 1/4″ 2 1/2″ Stern Tube $269.99 |
|
|
Lasdrop Gen II Shaft Seal 1 1/4″ 2 5/8″ Stern Tube $269.99 |
|
|
NEW SWAGELOK SS-BN8S6-2C HIGH PURITY BELLOWS SEALED VALVE NC ACTUATOR 3/8″ TUBE $259.99 |
|
|
40W Water Cool Sealed CO2 Laser Tube Engraving Engraver Cutting w/ Power Supply $250.98 |
|
|
40W Water Cool Sealed CO2 Laser Tube Engraving Engraver Cutting w/ Power Supply $250.98 |
|
|
LEPEL 018-0025 ELECTRON TUBE *FACTORY SEALED* $250.00 |
|
|
NOS GE GL7703 Ignitron Crowbar Electron Tube – Sealed, Unopened Box! $249.99 |
|
|
Lulu Deluxe TUBE Collectors Edition Lou Reed Metallica SEALED $249.85 |
|
|
Russian Geiger TUBE Counter SBT-10A NEW LOT 1 SEALED $249.00 |
|
|
2 Tubes NOS Telefunken EF86 sealed old boxes (1068) $240.00 |
|
|
DEEP BLUE DIVE Watch NAVY SEAL TRITIUM Tube Dial – T25 mb Microtec H3 – BNIB $234.99 |
|
|
SWAGELOK SS-BN8S6-2C BELLOWS SEALED VALVE STAINLESS STEEL 3/8″ TUBE FITTING $219.99 |
|
|
NEW INDUSTRIAL 40W CO2 SEALED EXTRA LONG LIFE LASER TUBE ENGRAVING CUTTING r2 $214.56 |
|
|
Lumenis CO2 Sealed-off Laser Tube Sharplan AS2753400 $200.00 |
|
|
NEW POP-A-PLUG II EXPANSION SEAL TECH TUBE RAM SET $199.95 |
|
|
NEW Foxboro 8000A Compact Magnetic Flowtube 8002A-WPR-HJGFGZ-A 2″ Tube Sealed $199.00 |
|
|
ROLEX FACTORY SEALED YL GOLD TUBE SET 24 7030 8 NEW!!! $198.00 |
|
|
ROLEX FACTORY SEALED STEEL TUBE 24 – 7000 NEW!!! $198.00 |
|
|
ROLEX FACTORY SEALED ORIGINAL W GOLD TUBE 24 5330 9 NEW $190.00 |
|
|
ROLEX FACTORY SEALED ORIGINAL Y GOLD TUBE 24 5330 8 NEW $188.00 |
|
|
40w CO2 Sealed Laser Engraver Tube Water Cool $180.00 |
|
|
1200 Robinson Nugent Connectors SBQ-25P-S-100-T ; Bulk lot- Sealed Tubes (#873) $180.00 |
|
|
40W CO2 Sealed Laser Engraver Tube Water Cool 80cm $180.00 |
|
|
25 NEW SEALED COVARIS 520021 TISSUE TUBES SAMPLE COLLEC $179.99 |
|
|
Parker 3/4″ x 1/2″ Seal-Lok-S 13/16″-16 UN/F O-Ring Face Seal Tube Fittings $179.00 |
|
|
Case Dozer 650 750 850BCDEGH Weld-On Track Adjuster Tube with 907004 Seal Kit $178.00 |
|
|
TRIUMPH FORKS TUBES TUBE GAITERS SEAL SPRINGS BUSHING $175.00 |
|
|
Beckman Quick-Seal Tube Sealer with Rack (Cat. No.342420) for Lab Centrifugation $175.00 |
|
|
40W Water Cool Sealed CO2 Laser Tube Engraving Engraver Cutting Cutter Machine $174.98 |
|
|
40W Water Cool Sealed CO2 Laser Tube Engraving Engraver Cutting Cutter Machine $174.98 |
|
|
TELEFUNKEN EF14 TUBE NOS NIB sealed for condenser Microphone $169.00 |
|
|
40W CO2 SEALED LASER ENGRAVER TUBE WATER COOL NEW s $168.00 |
|
|
NEW INDUSTRIAL 40W CO2 SEALED EXTRA LONG LIFE LASER TUBE ENGRAVING CUTTING d $168.00 |
|
|
Hign Quality 40W CO2 Sealed Laser Engraver Tube Water Cool 70cm Engraving $168.00 |
|
|
40W CO2 SEALED LASER ENGRAVER TUBE WATER COOL NEW m5 $168.00 |
|
|
Fluorescence Quartz Cuvette with Quartz to Pyrex Graded Seal Tube, Cell Cuvettes $164.95 |
|
|
70s Norton 750 850 Commando front end fork set w/ new tubes seals, bushings, etc $162.50 |
|
|
Genalex Gold Lion Z729 / EF86 tube, still sealed!! $160.00 |
|
|
NEW Swagelok SS-QTM8A-B-1210 PTFE-Sealed Quick-Connect 3/4″ Tube Fitting! $159.99 |
|
|
FasTest (FE1-16) Ext. Quick Seal 0.512-0.591″ Tube Test $159.00 |
|
|
Parker 16 ELO-S 1″ x 1″ Seal-Lok-S 1-7/16″-12 UN/F O-Ring Face Seal Tube Fitting $156.32 |
|
|
SWAGELOK SS-BNS6-C HIGH PURITY BELLOWS SEALED VALVE STAINLESS STEEL T 3/8″ TUBE $154.99 |
|
|
Parker 3/8″ Seal-Lok-S 11/16″-16 x 7/16″-20 O-Ring Face Seal Tube Fittings $152.27 |
|
|
Milodon 27500 Hemi Tube Seals JEGS $151.99 |
|
|
2x PCC85/9AQ8 TELEFUNKEN NOS *SEALED* Tube Röhre Valvola Lampe TSF Valvula $149.99 |
|
|
25 NEW SEALED COVARIS 520001 TISSUE TUBES SAMPLE COLLEC $149.99 |
|
|
Quartz Cuvette with Quartz to Pyrex Graded Seal Tube, 10mm, Cell Cuvettes $149.95 |
|
|
Duniway I-SLD-N Sealed Iridium Tube New $148.48 |
|
|
KIT, SEAL ORTMAN 7K PART# TS877512000 QUINCY 7K,7L,08.008B,TUBE SL,BV,BU $145.00 |
|
|
Seymour Duncan SFX-11 Twin Tube Blue Distortion Pedal SFX11 Sealed Retail Box $144.99 |
|
|
05-06 GSXR 1000 RIGHT FRONT FORK TUBE STOCK SEALS OEM PARTS SUSPENSION $140.00 |
|
|
05-06 GSXR 1000 LEFT FRONT FORK TUBE STOCK SEALS OEM PARTS SUSPENSION $140.00 |
|
|
SWAGELOK NUPRO SS-4BK-1C BELLOWS SEALED VALVE STAINLESS STEEL 1/4″ TUBE FITTING $139.99 |
|
|
Bacteria in a Sealed Test Tube Re. Penicillin Research $69.99 Bacteria in a Sealed Test Tube Re. Penicillin Research – Photographic Print |
|
|
Taco Led Tube Light $59.99 Taco Led Tube Light . The Tube Light is great for use in engine rooms, T-tops and arches. Universal design for use as is, or replacement light for existing standard T-top light housings. 108 LEDs provide high output, low glare light and draw only .25 amps. Switch from white light to red light for chart-reading with the addition of a toggle switch. Impact-resistant Polycarbonate lens. Light tube and connection sealed for water resistance. Mounting clips included for easy installations. 20-1/2″L. |
|
|
Krups Tube $5.6 Tube |
|
|
Sealed $12.78 Description not provided. |
|
|
Sealed with a Kill $19.4 Sealed with a Kill |
|
|
Sealed With A Kiss $4.32 Sealed With A Kiss |
|
|
Sealed Secrets $8.92 Sealed Secrets |
|
|
Sealed Fate $16.41 Sealed Fate |
|
|
Sealed in Fire $15.8 Sealed in Fire |
|
|
Sealed with a Fist $7.53 Sealed with a Fist |
|
|
The Tube $14.99 Gerard Kearney The Tube – Art Print |
|
|
Air Flyer 56-inch Snow Tube $53.99 Air Flyer 56-inch Snow TubeModel: NW919Color: Yellow/multiClassic round snow tube has room for two (2)Oversized PVC molded handles leave plenty of room for mittensMade of heavy-duty PVC with Cold-Crack additiveHeat sealed seamsSpeed safety valve for super fast inflation and deflationDimensions: 56 inches in diameter |
|
|
Sportsstuff 30-1102 Snopedo Snow Tube $39.95 “Sportsstuff Snopedo Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-1102 air cushioned inflatable tube features a slick heavy-duty PVC construction, safety valve for fast inflation, & bold eye-catching graphics that will get you noticed. The sleek aerodynamic design can be ridden in the seated or prone position, featuring two heavy-duty molded handles with plenty of mitten room. The Snopedo is loaded and ready for action on you favorite sledding hill this winter, so let it snow 30-1102 Features: Product # 30-1102, Snopedo Snow Tube, Up To 1 Rider, For Summer or Winter Use, Slick Heavy-Gauge PVC w/ Cold-Crack Additive, Patented Speed Safety Valve for Fast Inflation & Deflation, Heat Sealed Seams, Molded PVC Handles” |
|
|
Sportsstuff 30-2512 Amerisport Snow Tube $37.95 “Sportsstuff Amerisport Snow Tube Brand New Includes 90 Days Warranty, The World Industries 30-2512 is a hot classic round snow tube made extra large to enable various riding positions Fly down your favorite sledding hill gripping the oversized PVC molded handles and feeling the air cushioned comfort of this giant Americana joy ride The Speed Safety Valve makes inflation and deflation fast and easy. 30-2512 Features: Product # 30-2512, Speedseeker Snow Tube, Up To 1 Rider, For Summer or Winter Use, Slick Heavy-Gauge PVC w/ Cold-Crack Additive, Patented Speed Safety Valve for Fast Inflation & Deflation, Heat Sealed Seams, Molded PVC Handles” |
|
|
Magnet Tube Magnetic Field Viewer $12.99 Magnets are sort of like the rock stars of the science world – they pump screaming music out to the crowds (there are magnets in guitar pick ups, microphones, and big honking speakers, for example). The real reason magnets are like rock stars is because they are both so darn attractive. Get it? GET IT?!? Oh, we slay ourselves. Bur seriously folks, we really are magnet groupies and we love checking out magnetic fields. And viewing magnetic fields has never been easier than with the Magnet Tube Magnetic Field Viewer. The Magnet Tube is a sealed plastic tube filled with iron filings. There’s a tunnel through the tube, however, that the Alnico magnet (the same type in microphones, speakers, and etc.) fits in. Give the tube a shake and the iron filings collect and connect, showing the arcs of the magnetic fields. This is a great little science fair-y experiment and also an awesome desk toy. ‘Cause you can slide the magnetic back and forth and make the iron filings dance. It’s a scientific hula! |
|
|
Sportsstuff 30-1602 Heatseeker Snow Tube $48.95 “Sportsstuff Heatseeker Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-1602 hi-tech uniquely shaped tube features a heavy-duty PVC construction & comfortable mesh seating to keep you sledding all day long. The over sized Speed Safety Valve makes inflation fast and easy and the wide molded PVC handles will provide the grip needed to take your sledding adventure to a whole new level. The innovative Swiftex directional bottom on Heatseeker will guide you and your tube straight down a path to good times this winter. 30-1602 Features: Product # 30-1602, Heatseeker Snow Tube, Up To 1 Rider, For Summer Use, Heat Sealed Seams, Unique Aerodynamic Construction, Swiftex&trade Directional Bottom, Heavy-Gauge PVC w/ Cold-Crack Additive, Speed Safety Valve for Fast Inflation & Deflation, Heavy-Duty Molded PVC Handles, Comfort Mesh Seating, Reinforced Grommets, Tote Strap for Easy Transport” |
|
|
Sportsstuff 30-2312 Speedseeker Snow Tube $67.95 “Sportsstuff Speedseeker Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-2312 is a serious multipurpose tube for 1-2 riders featuring SwiftexT directional bottom to speed things up. The Speed Safety Valve makes inflation and deflation fast and easy while the double-webbing foam handles with knuckle guards make holding on simple and comfortable. This hi-tech tube features heavy-duty PVC construction & an ergonomic backrest with comfortable mesh seating to keep you and a friend sledding all day long. 30-2312 Features: Product # 30-2312, Speedseeker Snow Tube, Up To 2 Rider, For Summer or Winter Use, Slick Heavy-Gauge PVC w/ Cold-Crack Additive, Patented Speed Safety Valve for Fast Inflation & Deflation, Heat Sealed Seams, Molded PVC Handles, SwiftexT Directional Bottom, Heavy-Duty Double Stitched Partial Nylon Cover, Comfort Mesh Seating, Reinforced Grommets, Tote Rope for Easy Transport” |
|
|
Sportsstuff 30-1002 Rally Snow Tube $39.95 “Sportsstuff Rally Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-1002 cherry red, flaming hot rod features a slick heavy-duty PVC construction, safety valve for fast inflation, and molded PVC handles with plenty of mitten room. The Rally is fully loaded with bold eye-catching graphics and cup-like seating for extra stability on your favorite sledding hill. Peel-out and fly down the slopes on the Rally this winter 30-1002 Features: Product # 30-1002, Rally Snow Tube, Up To 1 Rider, For Summer & Winter Use, Slick Heavy-Gauge PVC w/ Cold-Crack Additive, Patented Speed Safety Valve for Fast Inflation & Deflation, Heat Sealed Seams, Heavy-Duty Molded PVC Handles” |
|
|
Sportsstuff 30-1202 Gizmo Snow Tube $57.95 “Sportsstuff Gizmo Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-1202 with exclusive snowmobile shaped design features a slick heavy-duty PVC construction and directional SwiftexT bottom so you can ride straight in any direction you choose. The Safety Valve makes inflation fast and easy and the molded PVC handles with plenty of mitten room allow steering and holding on tight. 30-1202 Features: Product # 30-1202, Gizmo Snow Tube, Up To 1 Rider, For Winter Use, Slick Heavy-Gauge PVC w/ Cold-Crack Additive, Patented Speed Safety Valve for Fast Inflation & Deflation, Heat Sealed Seams, Molded PVC Handles, SwiftexT Directional Bottom, Reinforced Grommets, Tote Rope for Easy Transport” |
|
|
Tusk Aluminum Throttle Tube with Bearing $29.99 Durable aluminum construction. Sealed ball bearing on the outward end and nylon sleeve on the inward end for virtually drag-free operation. Will only fit aluminum handlebars. |
|
|
Sportsstuff Air Flyer Snow Tube $38.99 The Air Flyer is a king-sized, classic round snow tube with room for two. It features plenty of over-sized molded PVC handles, single chamber inflation, and convenient patented speed safety valve for fast inflation and deflation. Brand: Sportsstuff Air Flyer Snow TubeHeavy-gauge PVC with cold-crack additiveHeat sealed seamsSpeed safety valveOver-sized molded PVC handles with plenty of mitten roomTwo (2) rider maximum capacityWeight capacity: 340 pounds (154kg)Materials: PVCDimensions (deflated): 60 inches wide x 60 inches longModel: 30-3524 |
|
|
Texsport U-tube Floating Lantern $25.49 Lantern features a bright, 7-watt fluorescent U-tube bulbCamping and outdoor light offers 360-degree illuminationTexsport's ultra-clear acrylic, sealed waterproof housing allows lantern to floatSolid state circuitry promotes maximum battery lifeConvenient folding handleHigh-tech silver and black finishRequires four D-cell batteries (not included)Measures 9.5 inches high x 4.5 inches diameter |
|
|
Speedseeker 2-passanger Inflatable Snow Tube $83.99 Constructed of tough, heavy-gauge PVC, the Speedseeker 2-passanger Inflatable Snow Tube spotlights bold graphics and strong, easy-grip handles. This tube features a directional bottom allowing the rider to keep this 'snowmobile' straight and true.Brand: Sport StuffSpeedseeker 2-passanger Inflatable Snow TubeColor: Yellow/multiMaterials: Mesh/PVCSize: 72 inches longComfortable mesh seating and ergonomic backrestSwiftex directional bottom ensure fast, fun-filled sleddingBold graphicsStrong, easy-grip handlesHeat sealed seams and Cold-Crack additiveIncludes: Tote rope, reinforced grommets and speed safety valve for super fast inflation and deflationWeight capacity: 340 poundsDimensions: 72 inches long x 31 inches wideModel: NW904 |
|
|
Sportsstuff 30-1702 Swiss Luge Snow Tube $34.95 “Sportsstuff Swiss Luge Snow Tube Brand New Includes 90 Days Warranty, The Sportstuff 30-1702 innovative seating configuration enables an authentic luge style sledding experience you won’t forget. Featuring a special directional bottom that enables steering by leaning right or left in the direction you want to go. Constructed of heavy-duty 6P PVC with 2 molded handles and eye catching graphics. 30-1702 Features: Product # 30-1702, Swiss Luge Snow Tube, Up To 1 Rider, For Summer Use, Heat Sealed Seams, Swiftex&trade Directional Bottom, Heavy-Gauge PVC Bladder, Speed Safety Valve for Fast Inflation & Deflation, Heavy-Duty Molded PVC Handles” |
|
|
Rigid Inflatable Dinghy Tube Kits Pvc For Walker Bay 8 $799 Rigid Inflatable Dinghy Tube Kits Pvc For Walker Bay 8 . These tube kits transform your Walker Bay 8 or Walker Bay 10 boat into a Rigid Inflatable Dinghy (RID) and they increase load and horsepower ratings. A RID combines the best features of a versatile hard-shell dinghy with the utility and stability of an inflatable. Kits are available with tubes constructed of durable 1100 Decitex fabric tube with four air chambers sealed with multi-layer, reinforced seams, or with Hypalon tubes for maximum sun protection |
|
|
Rigid Inflatable Dinghy Tube Kits Pvc For Walker Bay 10 $999 Rigid Inflatable Dinghy Tube Kits Pvc For Walker Bay 10 . These tube kits transform your Walker Bay 8 or Walker Bay 10 boat into a Rigid Inflatable Dinghy (RID) and they increase load and horsepower ratings. A RID combines the best features of a versatile hard-shell dinghy with the utility and stability of an inflatable. Kits are available with tubes constructed of durable 1100 Decitex fabric tube with four air chambers sealed with multi-layer, reinforced seams, or with Hypalon tubes for maximum sun protection |
|
|
Sealed With a Kiss $5.49 Sealed With a Kiss seals your lipstick on for up to six hours. |
|
|
Globe Scientific Clinical Grade 15mL Centrifuge Tube, Sterile, Case of 500 $51.99 15mL Centrifuge Tube Features:*15mL Capacity. *Sterile. *Attached Blue Screwcap. *Black printed graduations. *White printed writing space. *Spin rate: 8500 rpm. *25 tubes per sealed bag. *Autoclavable (without cap). *Temperature Range: -40°C to +80°C. *Material: Tube: Polypropylene (PP).*Cap: High Density Polyethylene (HDPE). |
|
|
Lost in a Tube $8.73 Lost in a Tube |
|
|
TUBE: NATSU $41.01 TUBE: NATSU |
|
|
Tube Flies $22.36 Tube Flies |
|
|
Death Tube $41.65 Death Tube |
|
|
Sealed Beam Head Light $8.99 Sealed Beam Head Light; |
|
|
SEALED BY CHRIST: PRECIOSO AMOR $15.12 SEALED BY CHRIST: PRECIOSO AMOR |
|
|
Rodion Shchedrin: The Sealed Angel $15.73 Rodion Shchedrin: The Sealed Angel |
|
|
Signed Sealed Delivered $7.28 Signed Sealed Delivered |
|
|
NEW LILY: SEALED $11.12 NEW LILY: SEALED |
|
|
Signed Sealed And Committed $18.65 Signed Sealed And Committed |
|
|
DETERMINATION: SEALED IN SKIN $13.53 DETERMINATION: SEALED IN SKIN |
|
|
Tube $16.96 Brutal terrorist T was a government agent until his agency used him as a pawn against his will, turning his own government against him. Now, his former government associate, Jay, is on his trail. They will come to blows during a busy weekday rush hour when Jay’s would-be girlfriend, Kay, calls him from a subway train to notify him that T has boarded the train with a large amount of explosives–which he threatens to detonate unless his demands are met. This big, Western-style Korean action film is the directorial debut from Baek Woon-hak, who was an assistant director on the internationally successful SHIRI (2002). |
|
|
Free shopping,5meters/pcs,Diameter:6mm Tube,air Tube,CO2 Tube,Ozone tube $5.26 Diameter:6mm Tube,Tube,air Tube,CO2 Tube,Ozone tube,. . 5M/pieces |
|
|
Sheltering in Tube $24.99 Sheltering in Tube – Photographic Print |
|
|
Tube Crash $24.99 Tube Crash – Photographic Print |
|
|
Tube Station $24.99 Tube Station – Photographic Print |
|
|
Torpedo Tube $24.99 Torpedo Tube – Photographic Print |
|
|
Tube Train $24.99 Tube Train – Photographic Print |
|
|
Tube Extension $24.99 Tube Extension – Photographic Print |
|
|
Surfer in Tube $29.99 Surfer in Tube – Wood Sign |
|
|
Irrigation Tube $24.99 Irrigation Tube – Photographic Print |
|
|
Tube Overground $24.99 Tube Overground – Photographic Print |
|
|
My Lips are Sealed $24.99 Irene Schmidt My Lips are Sealed – Photographic Print |
|
|
Heather Flowers in their Sealed Boxes $69.99 Heather Flowers in their Sealed Boxes – Photographic Print |
|
|
Envelope Sealed with Wax $24.99 Terry Why Envelope Sealed with Wax – Photographic Print |
|
|
Birthday Greetings, Sealed Letter $49.99 Birthday Greetings, Sealed Letter – Giclee Print |
|
|
Koni Shock and Struts – Front [90-92 Volkswagen Golf II (Models w/ Non-Sealed Struts)] $99 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Hydraulic;;Adjustment Feature: Standard Adjustable;;Body Style: McPherson Strut Cartridge” |
|
|
Koni Shock and Struts – Front [90-92 Volkswagen Jetta II (Models w/ Non-Sealed Struts)] $99 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Hydraulic;;Adjustment Feature: Standard Adjustable;;Body Style: McPherson Strut Cartridge” |
|
|
Koni Shock and Struts – Front [90-92 Volkswagen Golf II (Models w/ Sealed Struts)] $130.5 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Hydraulic;;Adjustment Feature: Standard Adjustable;;Body Style: McPherson Strut Complete Housing” |
|
|
Koni Shock and Struts – Front [90-92 Volkswagen Jetta II (Models w/ Sealed Struts)] $130.5 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Hydraulic;;Adjustment Feature: Standard Adjustable;;Body Style: McPherson Strut Complete Housing” |
|
|
Koni Shock and Struts – Sport Alternative Rebound Adjustable (Front) [90-92 Volkswagen Golf II (Models w/ Sealed Struts)] $212.4 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Low Pressure Gas;;Adjustment Feature: Externally Adjustable;;Body Style: McPherson Strut Complete Housing” |
|
|
Koni Shock and Struts – Sport Alternative Rebound Adjustable (Front) [90-92 Volkswagen Jetta II (Models w/ Sealed Struts)] $212.4 “KONI uses a variety of technologies: twin-tube low pressure gas-hydraulic dampers, twin-tube hydraulic dampers and mono-tube gas-hydraulic dampers. All these shock absorbers have typical properties which influence road behaviour of the car. The inappropriate use of pressurised shock absorbers may increase the ride-height which could affect the stability of the car and thus the safety. However, the handling of some cars may improve by using these shock absorbers. Therefore KONI does not simply supply pressurised shock absorbers for every type of car. Instead KONI chooses the technology which results in the best road holding, safety and comfort for each individual application.;;Construction Type: Twin Tube Low Pressure Gas;;Adjustment Feature: Externally Adjustable;;Body Style: McPherson Strut Complete Housing” |
|
|
Tube Clamp $62.99 Tube Clamp; 1.75 in.; Machined; Pair; |
|
|
Shadow Tube $29.99 Croci Shadow Tube – Giclee Print |
|
|
Jabsco Sealed Beam Unit 155sl $84.99 Jabsco Sealed Beam Unit 155sl . Sealed Beam Unit 155SL |
|
|
IGH Sealed S/S Tee $30 IGH Sealed S/S Tee |
|
|
Hughes & Kettner Tube Tools Tube Rotosphere MKII $512.43 Hughes & Kettner Tube Tools Tube Rotosphere MKII |
|
|
Viair Sealed Pressure Switch $19.99 Sealed for moisture resistance and comes with 1-8inch NPT male port fitting |
|
|
Signed and Sealed, 1907 $34.99 Charles Van Den Eycken Signed and Sealed, 1907 – Giclee Print |
|
|
Tube Bumper $391.99 Tube Bumper; w-Class III Receiver Hitch; |
|
|
Avalon VT-737sp Class A Mono Tube Channel Strip Limited Edition $2250 In honor of the 10th anniversary of the release of the renowned VT-737sp Class A Mono Tube Channel Strip, Avalon has produced a special “Blackface” model. The VT-737SP features a combination of TUBE preamplifiers, opto-compressor, sweep equalizer, output level and VU metering in a 2U space. The VT737SP Anniversary is identical in terms of circuitry, the only difference being cosmetic; the front panel is matte-black and the original orange LEDs have been replaced with cool blue ones.PREAMPLIFIERThe VT-737SP has three input selections:1. The VT-737SP features a higher-performance microphone input transformer with +48v phantom selection.2. Instrument DI high source input with jack located on front panel.3. Balanced line input, discrete high-level Class A.The class A preamplifier utilizes two cascaded, dual vacuum tube triodes configured with minimum negative feedback. A high gain switch boosts the overall gain of the preamplifier. The four high-quality tubes are configured as singled-ended anode coupled followers. A passive-variable high-pass filter and hardwire relay bypass completes the input signal conditioning. The phase reverse relay is available on all three inputs.OPTO-COMPRESSONThe opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard-knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter. Special spectral control including de-ess is available with the dual sweep mid EQ to sidechain switch. The EQ section can be flipped pre or post the opto-compressor via a front panel switch for alternate effects and tone shaping. Two VT-737SPs can be linked via a rear panel link cable for stereo tracking. The compressor bypass is a sealed silver relay for the most direct signal path.SWEEP-EQUALIZER AND OUTPUT LEVELClass A high-voltage transistors are used for optimum sonic performance. The high and low frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the mid bands is extended into the high and low bands by the use of X10 frequency multipliers. The bypass switch incorporates a sealed silver relay for the most direct signal path. When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for “tone enhancement”. The output level control provides a variable control of the overall signal path. The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier.VALON VT-737SP FEATURESVacuum tube triode signal path, transformer balanced microphone input, high-voltage circuits for maximum headroom to +30dB, low noise -92dB, internal discrete power supply with tor |
|
|
Surfing in the Tube $19.99 Sean Davey Surfing in the Tube – Photographic Print |
|
|
The Insertion of a Tube $34.99 Georges Chicotot The Insertion of a Tube – Giclee Print |
|
|
Red Tube $29.99 Vladimir Bridan Red Tube – Photographic Print |
|
|
Used Avalon Vt-737Sp Class A Mono Tube Channel Strip Limited Edition $2047.5 In honor of the 10th anniversary of the release of the renowned VT-737sp Class A Mono Tube Channel Strip, Avalon has produced a special “Blackface” model. The VT-737SP features a combination of TUBE preamplifiers, opto-compressor, sweep equalizer, output level and VU metering in a 2U space. The VT737SP Anniversary is identical in terms of circuitry, the only difference being cosmetic; the front panel is matte-black and the original orange LEDs have been replaced with cool blue ones.PREAMPLIFIERThe VT-737SP has three input selections:1. The VT-737SP features a higher-performance microphone input transformer with +48v phantom selection.2. Instrument DI high source input with jack located on front panel.3. Balanced line input, discrete high-level Class A.The class A preamplifier utilizes two cascaded, dual vacuum tube triodes configured with minimum negative feedback. A high gain switch boosts the overall gain of the preamplifier. The four high-quality tubes are configured as singled-ended anode coupled followers. A passive-variable high-pass filter and hardwire relay bypass completes the input signal conditioning. The phase reverse relay is available on all three inputs.OPTO-COMPRESSONThe opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard-knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter. Special spectral control including de-ess is available with the dual sweep mid EQ to sidechain switch. The EQ section can be flipped pre or post the opto-compressor via a front panel switch for alternate effects and tone shaping. Two VT-737SPs can be linked via a rear panel link cable for stereo tracking. The compressor bypass is a sealed silver relay for the most direct signal path.SWEEP-EQUALIZER AND OUTPUT LEVELClass A high-voltage transistors are used for optimum sonic performance. The high and low frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the mid bands is extended into the high and low bands by the use of X10 frequency multipliers. The bypass switch incorporates a sealed silver relay for the most direct signal path. When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for “tone enhancement”. The output level control provides a variable control of the overall signal path. The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier.VALON VT-737SP FEATURESVacuum tube triode signal path, transformer balanced microphone input, high-voltage circuits for maximum headroom to +30dB, low noise -92dB, internal discrete power supply with tor |
|
|
Avalon Vt-737Sp Class A Mono Tube Channel Strip Limited Edition $2249 In honor of the 10th anniversary of the release of the renowned VT-737sp Class A Mono Tube Channel Strip, Avalon has produced a special “Blackface” model. The VT-737SP features a combination of TUBE preamplifiers, opto-compressor, sweep equalizer, output level and VU metering in a 2U space. The VT737SP Anniversary is identical in terms of circuitry, the only difference being cosmetic; the front panel is matte-black and the original orange LEDs have been replaced with cool blue ones.PREAMPLIFIERThe VT-737SP has three input selections:1. The VT-737SP features a higher-performance microphone input transformer with +48v phantom selection.2. Instrument DI high source input with jack located on front panel.3. Balanced line input, discrete high-level Class A.The class A preamplifier utilizes two cascaded, dual vacuum tube triodes configured with minimum negative feedback. A high gain switch boosts the overall gain of the preamplifier. The four high-quality tubes are configured as singled-ended anode coupled followers. A passive-variable high-pass filter and hardwire relay bypass completes the input signal conditioning. The phase reverse relay is available on all three inputs.OPTO-COMPRESSONThe opto-compressor features a minimum signal path design with twin Class A vacuum tube triodes for gain matching. The optical attenuator acts as a simple passive level controller. Full dynamic control from soft compression to hard-knee limiting can be achieved with threshold, ratio-compression, attack and release controls plus gain reduction selection on the large VU meter. Special spectral control including de-ess is available with the dual sweep mid EQ to sidechain switch. The EQ section can be flipped pre or post the opto-compressor via a front panel switch for alternate effects and tone shaping. Two VT-737SPs can be linked via a rear panel link cable for stereo tracking. The compressor bypass is a sealed silver relay for the most direct signal path.SWEEP-EQUALIZER AND OUTPUT LEVELClass A high-voltage transistors are used for optimum sonic performance. The high and low frequency bands provide the smooth characteristics of an all passive design, while the dual mid bands include variable frequency and switched Q-width selection. The enhanced range of the mid bands is extended into the high and low bands by the use of X10 frequency multipliers. The bypass switch incorporates a sealed silver relay for the most direct signal path. When the EQ to sidechain is engaged, the high-low EQ remains in the audio path for “tone enhancement”. The output level control provides a variable control of the overall signal path. The output amplifier utilizes another dual triode vacuum tube driving a 100% discrete, Class A, high-current, balanced and DC coupled low noise output amplifier.VALON VT-737SP FEATURESVacuum tube triode signal path, transformer balanced microphone input, high-voltage circuits for maximum headroom to +30dB, low noise -92dB, internal discrete power supply with tor |
|
|
TUBE: TUBE $43.99 Description not provided. |
|
|
Sealed Receiver – 2 Pack – Black $61.71 Tallon Marine Sealed Receiver – 2 Pack – Black |
|
|
Sealed Receiver – 2 Pack – White $61.71 Tallon Marine Sealed Receiver – 2 Pack – White |
|
|
Sealed Receiver – 2 Pack – Stainless $79.86 Tallon Marine Sealed Receiver – 2 Pack – Stainless |
|
|
Sealed Macerator Self-Priming Pump $134.83 Jabsco Sealed Macerator Self-Priming Pump |
|
|
Self Priming Sealed Macerator Pump $141.58 Jabsco Self Priming Sealed Macerator Pump |
|
|
PreSonus ADL 600 Stereo High Voltage Tube Microphone Preamp $2199.95 The PreSonus ADL 600 is a high-voltage, 2-channel microphone preamp designed by world-renowned analog tube circuit designer Anthony DeMaria. It utilizes a Class A discrete design with 3 vacuum tubes per channel for maximum headroom and tonality.Control and FlexibilityThe ADL 600 is designed for supreme sonic performance and flexibility with XLR microphone/line inputs and 1/4″ instrument inputs. The input selector allows for selection between Hi-Z instrument input, line input, and 4 different mic impedances for a number of applications. The rotary High Pass Filter switch has 3 settings (40Hz, 80Hz, and 120Hz @ 6dB per octave) for controlling room rumble and low-frequency noise. The input gain attenuator delivers 5dB-step increments and a total gain of over 72dB. The output stage is controlled by a variable conductive plastic attenuator that delivers +/-10dB of fine tune trim adjustment to dial-in the perfect gain structure for the application at hand. The ADL 600 also includes 48V phantom power and a -20dB pad. Under the HoodThere are no op-amps or integrated circuits (IC’s) in the signal path to ensure the purest sound possible. The dual-transformer design guarantees ultralow-noise operation with maximum common mode rejection.MeteringThe ADL 600 is loaded with both fast-acting 8-segment LED meters for accurately detecting fast transients and peaks, as well as large analog VU meters for metering output level.ComponentsThe overall approach to the ADL 600′s design was to keep the signal path as simple as possible by keeping the component count to a minimum. The few components that are in the signal path were chosen for their sonic qualities: custom audio transformers, polyfilm pulse capacitors, 1% metal film resistors, and conductive plastic potentiometers. Also, rotary switches and fixed 1% metal film resistors are used in the preamp gain circuit to keep noise to a minimum and to prevent any coloration that may be caused by a potentiometer.The custom-designed input transformer is fully encased in a Mumetal enclosure, yielding excellent noise characteristics and magnetic shielding. The transformer interfaces the balanced mic/line inputs to the tube preamp circuits. On the primary side of the transformer are circuits for +48V phantom power, microphone impedance, 20dB pad, and line input. All of these are switched by sealed relays for reliability. Also, the relays are located at the point where the switching is required. This minimizes the signal path length and helps to keep noise low.The combination of a 12AT7A tube and a 6922 tube form the principle gain stage, giving the ADL 600 its open and airy sound. This is primarily due to the circuit topology and the wide power supply rails applied to this stage–+/-320VDC. A high endurance Grayhill rotary switch and 1% metal film resistors are used to set the gain in 5dB steps. Polyfilm pulse capacitors are used for interstage coupling to maintain stunning clarity. The preamp stage drives the High Pass filt |
|
|
Used Presonus Adl 600 Stereo High Voltage Tube Microphone Preamp $2001.95 The PreSonus ADL 600 is a high-voltage, 2-channel microphone preamp designed by world-renowned analog tube circuit designer Anthony DeMaria. It utilizes a Class A discrete design with 3 vacuum tubes per channel for maximum headroom and tonality.Control and FlexibilityThe ADL 600 is designed for supreme sonic performance and flexibility with XLR microphone/line inputs and 1/4″ instrument inputs. The input selector allows for selection between Hi-Z instrument input, line input, and 4 different mic impedances for a number of applications. The rotary High Pass Filter switch has 3 settings (40Hz, 80Hz, and 120Hz @ 6dB per octave) for controlling room rumble and low-frequency noise. The input gain attenuator delivers 5dB-step increments and a total gain of over 72dB. The output stage is controlled by a variable conductive plastic attenuator that delivers +/-10dB of fine tune trim adjustment to dial-in the perfect gain structure for the application at hand. The ADL 600 also includes 48V phantom power and a -20dB pad. Under the HoodThere are no op-amps or integrated circuits (IC’s) in the signal path to ensure the purest sound possible. The dual-transformer design guarantees ultralow-noise operation with maximum common mode rejection.MeteringThe ADL 600 is loaded with both fast-acting 8-segment LED meters for accurately detecting fast transients and peaks, as well as large analog VU meters for metering output level.ComponentsThe overall approach to the ADL 600′s design was to keep the signal path as simple as possible by keeping the component count to a minimum. The few components that are in the signal path were chosen for their sonic qualities: custom audio transformers, polyfilm pulse capacitors, 1% metal film resistors, and conductive plastic potentiometers. Also, rotary switches and fixed 1% metal film resistors are used in the preamp gain circuit to keep noise to a minimum and to prevent any coloration that may be caused by a potentiometer.The custom-designed input transformer is fully encased in a Mumetal enclosure, yielding excellent noise characteristics and magnetic shielding. The transformer interfaces the balanced mic/line inputs to the tube preamp circuits. On the primary side of the transformer are circuits for +48V phantom power, microphone impedance, 20dB pad, and line input. All of these are switched by sealed relays for reliability. Also, the relays are located at the point where the switching is required. This minimizes the signal path length and helps to keep noise low.The combination of a 12AT7A tube and a 6922 tube form the principle gain stage, giving the ADL 600 its open and airy sound. This is primarily due to the circuit topology and the wide power supply rails applied to this stage–+/-320VDC. A high endurance Grayhill rotary switch and 1% metal film resistors are used to set the gain in 5dB steps. Polyfilm pulse capacitors are used for interstage coupling to maintain stunning clarity. The preamp stage drives the High Pass filt |
|
|
Presonus Adl 600 Stereo High Voltage Tube Microphone Preamp $2195 The PreSonus ADL 600 is a high-voltage, 2-channel microphone preamp designed by world-renowned analog tube circuit designer Anthony DeMaria. It utilizes a Class A discrete design with 3 vacuum tubes per channel for maximum headroom and tonality.Control and FlexibilityThe ADL 600 is designed for supreme sonic performance and flexibility with XLR microphone/line inputs and 1/4″ instrument inputs. The input selector allows for selection between Hi-Z instrument input, line input, and 4 different mic impedances for a number of applications. The rotary High Pass Filter switch has 3 settings (40Hz, 80Hz, and 120Hz @ 6dB per octave) for controlling room rumble and low-frequency noise. The input gain attenuator delivers 5dB-step increments and a total gain of over 72dB. The output stage is controlled by a variable conductive plastic attenuator that delivers +/-10dB of fine tune trim adjustment to dial-in the perfect gain structure for the application at hand. The ADL 600 also includes 48V phantom power and a -20dB pad. Under the HoodThere are no op-amps or integrated circuits (IC’s) in the signal path to ensure the purest sound possible. The dual-transformer design guarantees ultralow-noise operation with maximum common mode rejection.MeteringThe ADL 600 is loaded with both fast-acting 8-segment LED meters for accurately detecting fast transients and peaks, as well as large analog VU meters for metering output level.ComponentsThe overall approach to the ADL 600′s design was to keep the signal path as simple as possible by keeping the component count to a minimum. The few components that are in the signal path were chosen for their sonic qualities: custom audio transformers, polyfilm pulse capacitors, 1% metal film resistors, and conductive plastic potentiometers. Also, rotary switches and fixed 1% metal film resistors are used in the preamp gain circuit to keep noise to a minimum and to prevent any coloration that may be caused by a potentiometer.The custom-designed input transformer is fully encased in a Mumetal enclosure, yielding excellent noise characteristics and magnetic shielding. The transformer interfaces the balanced mic/line inputs to the tube preamp circuits. On the primary side of the transformer are circuits for +48V phantom power, microphone impedance, 20dB pad, and line input. All of these are switched by sealed relays for reliability. Also, the relays are located at the point where the switching is required. This minimizes the signal path length and helps to keep noise low.The combination of a 12AT7A tube and a 6922 tube form the principle gain stage, giving the ADL 600 its open and airy sound. This is primarily due to the circuit topology and the wide power supply rails applied to this stage–+/-320VDC. A high endurance Grayhill rotary switch and 1% metal film resistors are used to set the gain in 5dB steps. Polyfilm pulse capacitors are used for interstage coupling to maintain stunning clarity. The preamp stage drives the High Pass filt |
|
|
Mysterious Magnet Tube $14.35 Mysterious Magnet Tube |
|
|
Deuter Streamer Tube Insulator $17.9 Streamer Tube Insulator |
|
|
Tornador Siphon Tube $9.99 Tornador Siphon Tube |
|
|
Tornador Weighted Tube $14.99 Tornador Weighted Tube |
|
|
Seamless Stretch Tube Top $14.5 Seamless Stretch Tube Top |
|
|
Billabong Light Tube Dress $39.5 Billabong Light Tube Dress |
|
|
SCHAMPA SILKWEIGHT GAITER/TUBE $14.99 SCHAMPA SILKWEIGHT GAITER/TUBE |
|
|
KINGS TUBE FRONT 60/100-14 $6.99 KINGS TUBE FRONT 60/100-14 |
|
|
KINGS TUBE FRONT 70/100-17 $6.99 KINGS TUBE FRONT 70/100-17 |
|
|
KINGS TUBE FRONT 70/100-19 $7.99 KINGS TUBE FRONT 70/100-19 |
|
|
KINGS TUBE FRONT 2.75/3.00-17 $7.99 KINGS TUBE FRONT 2.75/3.00-17 |
|
|
KINGS TUBE REAR 4.00/4.50-16 $9.99 KINGS TUBE REAR 4.00/4.50-16 |
|
|
KINGS TUBE RT 4.00/4.50-17 $9.99 KINGS TUBE RT 4.00/4.50-17 |
|
|
KINGS TUBE REAR 100/100-18 $9.99 KINGS TUBE REAR 100/100-18 |
|
|
KINGS TUBE REAR 100/90-19 $12.99 KINGS TUBE REAR 100/90-19 |
|
|
TURNER BEARING THROTTLE TUBE $35.99 TURNER BEARING THROTTLE TUBE |
|
|
SUNLINE ALUMINUM THROTTLE TUBE $49.99 SUNLINE ALUMINUM THROTTLE TUBE |
|
|
YOSHIMURA FORK TUBE CAPS $239.99 YOSHIMURA FORK TUBE CAPS |
|
|
BIKEMASTER FEATHER TUBE MIRRORS $34.99 BIKEMASTER FEATHER TUBE MIRRORS |
|
|
BIKEMASTER LOUVERS TUBE MIRRORS $69.99 BIKEMASTER LOUVERS TUBE MIRRORS |
|
|
ZAN HEADGEAR MOTLEY TUBE $9.99 ZAN HEADGEAR MOTLEY TUBE |
|
|
PRO CIRCUIT THROTTLE TUBE $59.99 PRO CIRCUIT THROTTLE TUBE |
|
|
KINGS TUBE REAR 110-120/90-19 $12.99 KINGS TUBE REAR 110-120/90-19 |
|
|
KINGS TUBE 2.50 OR 2.75-10 $6.99 KINGS TUBE 2.50 OR 2.75-10 |
|
|
KINGS TUBE REAR 80/100-12 $6.99 KINGS TUBE REAR 80/100-12 |
|
|
KINGS TUBE REAR 90/100-14 $8.99 KINGS TUBE REAR 90/100-14 |
|
|
BIKEMASTER WIDEVIEW TUBE MIRRORS $59.99 BIKEMASTER WIDEVIEW TUBE MIRRORS |
|
|
KINGS TUBE REAR 110-120/100-18 $12.99 KINGS TUBE REAR 110-120/100-18 |
|
|
TUBE PATCH KIT $3.99 TUBE PATCH KIT |
|
|
BRIDGESTONE TUBE – 2.50/2.75-10 $13.99 BRIDGESTONE TUBE – 2.50/2.75-10 |
|
|
BRIDGESTONE TUBE – FRONT 2.75-12 $13.99 BRIDGESTONE TUBE – FRONT 2.75-12 |
|
|
BRIDGESTONE TUBE – REAR 60/100-12 $13.99 BRIDGESTONE TUBE – REAR 60/100-12 |
|
|
BRIDGESTONE TUBE – FRONT 60/100-14 $13.99 BRIDGESTONE TUBE – FRONT 60/100-14 |
|
|
BRIDGESTONE TUBE – FRONT 70/100-17 $13.99 BRIDGESTONE TUBE – FRONT 70/100-17 |
|
|
BRIDGESTONE TUBE – FRONT 70/100-19 $13.99 BRIDGESTONE TUBE – FRONT 70/100-19 |
|
|
BRIDGESTONE TUBE – REAR 90/100-14 $13.99 BRIDGESTONE TUBE – REAR 90/100-14 |
|
|
BRIDGESTONE TUBE – REAR 90/100-16 $13.99 BRIDGESTONE TUBE – REAR 90/100-16 |
|
|
StingRay Snow Tube $16.34 SportsStuff StingRay Snow Tube |
|
|
D.W. Fearn VT-1 Single Channel Vacuum Tube Microphone Preamp $2400 Microphone preamplifiers from D.W. Fearn’s VT-series will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-1 from tube guru D.W. Fearn recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-1 preamplifier was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and ’60s, the VT-1 is built on a heavy-gauge aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sound clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-1 has become known for. All over the globe, VT-1 mic preamps are in daily use in the world’s best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Dual-channel version D.W. Fearn VT-2 also available (see #180272). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991, I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don’t often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully |
|
|
D.W. Fearn Vt-1 Single Channel Vacuum Tube Microphone Preamp $2400 Microphone preamplifiers from D.W. Fearn’s VT-series will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-1 from tube guru D.W. Fearn recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-1 preamplifier was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and ’60s, the VT-1 is built on a heavy-gauge aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sound clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-1 has become known for. All over the globe, VT-1 mic preamps are in daily use in the world’s best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Dual-channel version D.W. Fearn VT-2 also available (see #180272). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991, I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don’t often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully powerful sound. That recording was done on a 4-track Scully 280 and mixed to a 2-track Scully. My prize microphone was a Neumann U-87 and that’ |
|
|
Fender GT6550 Tube $78.29 Fender GT6550 Tube |
|
|
Meinl Wah Wah Tube $34.99 Meinl Wah Wah Tube |
|
|
Sovtek 5AR4 Rectifier Tube $24.99 Sovtek 5AR4 Rectifier Tube |
|
|
Mullard 12AX7 Preamp Tube $19.99 Mullard 12AX7 Preamp Tube |
|
|
Toca Graphix Tube Shaker $11.99 Toca Graphix Tube Shaker |
|
|
Sovtek 12AX7WC Preamp Tube $16.99 Sovtek 12AX7WC Preamp Tube |
|
|
Auralex Tube Tak Pro $8.99 Auralex Tube Tak Pro |
|
|
Sovtek 12AX7WA Preamp Tube $9.99 Sovtek 12AX7WA Preamp Tube |
|
|
ART Tube PAC $84.15 ART Tube PAC |
|
|
Groove Tubes GT6L6S Tube $46.8 Groove Tubes GT6L6S Tube |
|
|
Tungsol 12AX7 Tube $14.99 Tungsol 12AX7 Tube |
Categories: Acne